Veneer Edgebanding

RAMS Industries offers high-quality Veneer Edgebanding that provides designers and cabinet makers an elegant and natural way to finish any furniture design.

Benefits

  • High-quality, German-Made Veneer Edgebanding.
  • Grain and color-matching finger joints.
  • The joints are taped on the back for additional stability and appear every eight feet for common panel sizes.
  • Color-coordinated fleece in the back of the Edgebanding provides strength while blending in with the board surface.
  • The Edgebanding surface is sanded (180 grid) for a smooth finish.
  • UV-Lacquer provides heat, stain, and scratch resistance.

Pre-Glued Fleece Backed, Veneer Edgebanding

Special widths require minimum order quantities and extended lead times

  • Thickness .034″ plus or minus .002″ based on 0.12″ of hot melt
  • Standard length of continuous veneer roll – 250 lineal feet
  • Surface finish 180 grit
  • Core size 3″
  • Weight 2.5 lbs. per roll @ 7/8″

Automatic (Non-Glued) Fleece Backed Edgebanding

Special widths require minimum order quantities and extended lead times

  • Thickness .022″ plus or minus .002″
  • Standard length of continuous veneer roll – 500 lineal feet
  • Surface finish 180 grit
  • Core size 5″
  • Weight 3.5 lbs. per roll @ 7/8″

Pre-finished Automatic (Non-Glued), Veneer Edgebanding

Special widths require minimum order quantities and extended lead times

  • Thickness .020″ plus or minus .002″
  • Standard length of continuous veneer roll – 500 lineal feet
  • Gloss level between 20 and 30 is standard
  • UV lacquer finish at 1.5 mils in coverage

Stocked Species

White Birch Edgebanding
White Birch Edgebanding
Maple Edgebanding
Maple Edgebanding
Pine Edgebanding
Pine Edgebanding
White Oak Edgebanding
White Oak Edgebanding
Red Oak Edgebanding
Red Oak Edgebanding
Cherry Edgebanding
Cherry Edgebanding
Walnut Edgebanding
Walnut Edgebanding

Please visit our website to see the RAMS Industries Veneer Stock Program!